Pitco SG14TS Free Standing Twin Tank 4 Burner Natural Gas Fryer

Pitco SG14TS tube fired natural gas fryer with two tanks, two baskets and a large cooking area.

• Frying area 18 x 35cm per tank
• Oil capacity 9-11kg per tank
• Temperature 93°C to 190°C
• Power 50,000 BTU / 15kW per tank
• Dimensions W397 x D873 x H1198mm

The natural gas Pitco SG14TS can cook up to 18.6kg of fries per hour per tank with two separate frying areas of 18 x 36 x 10cm. The fryer has an atmospheric burner system combined with stainless steel heat tubes that utilize high temperature alloy stainless steel baffles.

The SG14TS has a deep cool zone with a minimum of 28% total oil capacity to trap burnt particles, crumbs and black specks. The flexible twin pan 7 x 14cm frying area has a depth of 10cm allowing you to cook large quantities of fried food.

A welded tank with an extra smooth peened finish ensures the fryer is easy to clean. Long lasting high temperature alloy stainless steel heat baffles are mounted in the heat exchanger tubes to provide maximum heating and combustion efficiency.

The millivolt thermostat maintains the selected temperature automatically between 93°C and 190°C. Integrated gas control valve acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator, and automatic main valve. Gas control valve prevents gas flow to the main burner until pilot is established and shuts off all gas flow automatically if the pilot flame goes out. Temperature limit switch safely shuts off all gas flow if the fryer temperature exceeds the upper limit.

Standard Equipment

Two nickel-plated, oblong, wire mesh baskets
Two nickel-plated tube rack
One drain extension
One drain line clean-out rod
Fryer cleaner sample
Rear gas connection
Manual gas shutoff
Two 1 1/4” (3.2 cm) full port drain valve
Built-in integrated flue deflector
Removable basket hanger for easy cleaning
9” (22.9 cm) adjustable legs
Cabinet - stainless steel front, door, and sides
Tank - stainless steel

Delivery

Free delivery on all orders over £60 (ex vat) and up to 30kg. Applies to UK mainland (UK Mainland excl. Highlands and Islands) and items held in stock only.

Orders under £60 are charged at £6.95 +VAT for delivery. All orders are dispatched with a Fast Courier Service. 

All deliveries are kerb side only by our courier partners.

Please be aware that orders may come in separate deliveries from different locations within the Cooksmill fulfilment centres.

For all queries regarding deliveries or order updates, please get in touch.

Returning items purchased online

If you purchase a stock item online that you want to return then you can send it back to us within 28 days of the sale and we will refund the value of the items that we receive back in resaleable condition.

Special orders and orders of appliances may incur restocking charges from the manufacturer. This can be up to 30%.

If there was a picking error and you received incorrect items we will arrange for a replacement.

If you receive any damaged items please email us immediately. We require images of the broken item and the packaging within 48 hours of the goods being signed for to process your claim.

Manufacturer's 1 Years Parts and Labour Warranty

All warranty is covered by the manufacturer of the equipment. Parts and labour means that an engineer from the manufacturer will attend your site. In some instances, the manufacturer may require a phone call prior to the visit to ascertain the nature of the fault.

The manufacturer will repair your equipment free of charge except in circumstances where the fault is due to misuse, operator error or failure to follow conditions of the warranty. If the fault it is found to be outside of the warranty terms you will be liable for all charges.

All gas equipment must be installed by a suitably qualified gas safe engineer. Manufacturer’s reserve the right to confirm the gas safe registration number of your installation engineer. Failure to follow correct installation will void your warranty. Gas equipment used in mobile catering may only be covered by parts only warranty.

All hard wired electrical equipment must be installed by a suitably qualified electrician. Failure to follow correct installation will void your warranty.

Please note warranty excludes consumables such as bulbs, glass, knobs etc.

All warranties are at the discretion of the manufacturer. For full manufacturer’s warranty terms and conditions please contact Cooksmill who will assist you.

Cooksmill is pleased to offer leasing in partnership with Kennet Equipment Leasing.

Leasing is available on orders over a value of £1,000 excluding VAT.

How Does Leasing Work?

Leasing is an alternative method of payment which protects your cash flow. You pay a monthly sum to Kennet Leasing instead of paying the total cost in one go. This means you can get the equipment you need now.

Is There a Tax Benefit?

All lease payments are treated as an allowable business expense and therefore attract tax relief for the full duration of the lease. Your accountant will be able to confirm this.

What Happens at The End of the Lease?

At the end of the agreement you can own the goods for one extra monthly payment.

What are The Costs?

There is a one off document cost of £130+vat with no annual service fees. Your repayments will depend on the value of the goods and how long you have been trading.